Are you looking for roofing replacement? You may need to understand the most common kinds of roof you want to install. The most popular forms of roofs are the hip, gable, flat roof, and shed roof. The first three forms are relatively more commonly applied than the last. A roof is more applied to warehouses, and cabins. In most homes, they are applied to additional buildings attached to the main building, such as a terrace, a hallway, or a garage. But lately, a simple roof is widely applied to main buildings such as minimalist and modern dwellings. We will explore more about the characteristics and ways to build a roof. Shed roof or often called a skewered roof is a roof model with the top leaning against or attached to the wall. Maybe that’s why it’s called the roof of the berth.

The main construction of the anchor roof as a loading pedestal uses sawhorses (½ sawhorses) with slope angles ranging from 20˚-40˚ according to taste or environmental conditions. For example, to facilitate the flow of rainwater or the fall of snow, the slope of a bribe roof is usually made steeper. But the slope angle also depends on the type of roofing material. For clay or ceramic tiles, roof angles can range from 30˚ – 40˚; for sheet roofs, such as asbestos or metal, the roof angle can be smaller, around ± 20˚-25˚. Semi-sawhorses construction, especially the edges, can be replaced with gears (mountains) in the form of a right triangle. The construction of roofing replacement of the anchor roof can be made on two sides facing each other (monitor shed), where both roofs lean on the same wall but with different heights. Two roofs can also be made back to back (butterfly shed).

In certain climate areas, especially those with little rainfall, the butterfly roof is used to hold rainwater, which is at the bottom of the roof meet. This simple roof model can be combined with other types of roofs. When everything is done, it still needs a final inspection in roofing replacement. It is carried out to ensure that the lightweight steel roof truss is properly installed; the similarity of the roof slope, alignment of battens, the accuracy of the row, and so on. If the roof cover has been chosen (ceramic tiles, concrete tiles, metal tiles, etc.) then it can be installed according to the procedure. Then proceed with closing the nok, making a plank list, and other final work.